OUTSTANDING RESISTANT AND ADAPTABLE PARTS

INJECTION MOLDING COMPONENTS THAT DESPITE THE MOST VARIOUS ELEMENTS AND FORCES

A product is only as good as the know-how behind it. Our experience in the highly demanding automotive sector has meanwhile also found its way into industries such as the construction or food industry. Very much to the satisfaction of our customers. But we are also researching and developing other suitable industries for rubber, TPE or multi-component solutions for injection molded parts. “All in one”, molded, overmoulded, surface-finished, … whatever the best and most economical for the respective application.

The right machines are available in our broad-based machinery. Often more important our team of experts, which researches, develops and combines the best of different materials and technologies into optimally deployable and efficiently manufacturable molded parts.

EXAMPLE CONSTRUCTION INDUSTRY: PARTS THAT RESIST WIND AND WEATHER

Whether in building construction or civil engineering – our experienced specialists will find a needs-based solution for your application. Above all, we are characterized by our flexibility and reliability, which will not let you down even with short-term construction projects or unscheduled construction sites. Our flat organizational structure lays the necessary foundation for a successful project realization. For the construction industry, we mainly process EPDM on our machines because the material has excellent elastic properties and is able to cope with wind and weather – even at high temperatures. Alternatively, VMQ silicone is used and if it fits the application, high quality TPE can also be a good alternative. We are happy to advise you on the optimal process and material combination and supplement your products with flock tapes or adhesive tapes.

SEALING COVERS FOR DOORS, WINDOWS AND FACADES

You will not find on every corner: molded parts that defy wind and weather permanently. No wonder then that our molded articles and profile frames like to take on load-bearing roles in construction and reliably seal doors, windows and facades. If required, our gaskets comply with the DIN 7863-1 standard. For this we have serial mixes that can be used immediately for new products. We specialize in sophisticated gasket corners with hollow chambers and complex geometries. For economic prices with the highest quality, we put it one step further: even with complicated contours we automate our production.

SEALS FOR WATER SUPPLY AND DRAINAGE

Watertight in every respect: seals whose manufacture incorporates all our expertise. All around pipes and floor drains, our seals prove impressively on a daily basis what know-how is inside them. Rubber properties according to DIN EN 681-1 or TPE properties according to DIN EN 681-2 for sewage and sewer pipe systems are part of our product portfolio.

FOOD FITTING MOLDINGS

Well prepared for the very special standards that are required for the use of molded parts. We process rubber and plastic materials that meet the international requirements of the FDA, the Federal Office for Risk Research (BfR) and (EU) No. 10/2011. We buy our raw materials only from leading manufacturers and specialists and produce the gaskets 100% in Germany. Together with accredited laboratories, we also like to carry out the food release on the finished part for you.

MULTI-COMPONENT PARTS – MULTI-COMPONENT INJECTION

We combine rubber with plastic and thus always offer our customers the perfect mix of materials. For this purpose, we encase, for example, glass fiber reinforced plastic parts made of PA6.6 with high-quality EPDM and thus achieve the best possible sealing properties with the highest stability requirements with our multi-component parts, even for difficult conditions. Alternatively, direct and highly efficient 2-component injection molding is also possible if, instead of EPDM, a TPE is also suitable for the application. Let us know what the product must and we will give you the right choice in the form of a suitable combination of materials.

The multi-component injection molding has a great economic advantage, since hard and soft components can be connected on a machine. We develop the products together with you, so that the sealing properties fit perfectly to your application and mounting aids are integrated directly into the hard component by means of threads or locking functions. Of course, the injection molds are designed to meet your demand. With our Multi-Component molded parts, we help our customers to become more competitive by eliminating the need for costly assembly of individual seal parts to plastic parts and ensuring that Multi-Component

GASKET RINGS AND MULTI-COMPONENT PARTS

If you are looking for simple sealing rings or molded rubber parts for your applications, you are also right with us. We offer classic 1-component gaskets in various materials such as EPDM, NBR, HNBR, VMQ IIR, ACM, FKM and others. Depending on the requirements profile, we are happy to advise you on the best material or a combination of materials with plastic. If a multi-component part comes into question, we have the opportunity to overmold plastic parts with rubber or to mount the plastic parts to the rubber parts after vulcanization.

OUR SERVICES

Take a look at our services – you will be impressed about what we can do for you!

Mold Manufacturing

Surface Effects

Assembly